日韩久久久久久久久久久,91在线精品秘密一区二区,日韩精品一区二区三区在线观看

BYD Electric Reach Forklift Maintenance Information-

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

However, since its development, electric forklifts have been subject to the bottleneck of batteries

The vehicle structure is rationally laid out, greatly shortening the turning radius of the vehicle and increasing the actual utilization rate of the warehouse

The vehicle moves backwards

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

Then, we need to check whether the wheels of the truck are severely worn or loose Under the same battery capacity, the communication system will last longer; currently, most of the equipment used in logistics distribution centers, warehouses, workshops, etc

The all-electric transport trucks of electric forklift manufacturers have the following advantages: the imported rims used for the load-bearing wheels are more durable; the optional side arm guards are safer and more reliable; the advanced Hall sensors replace the traditional micro switches; the wheels are made of imported polyurethane, suitable for various ground surfaces, and can travel quietly; the reverse emergency forward button is installed to improve the anti-collision safety factor; the handle design is ergonomic and more comfortable to use

So far, Hangcha Group has launched more than 30 AGV products equipped with various navigation methods

The main technical parameters include: rated lifting capacity, load center distance, maximum lifting height, mast inclination, maximum travel speed, minimum turning radius, minimum ground clearance, wheelbase, track width, etc

It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

The forklift editor reminds everyone that operating a forklift requires professional theoretical and practical training

BYD Electric Reach Forklift Maintenance Information- Stable and reliable

The long-lasting battery endurance can keep the machine in good and optimal condition

Customized equipment transportation plans, a high-tech enterprise integrating machinery and equipment research and development, manufacturing and sales Nowadays, electric pallet trucks produced by electric transport truck manufacturers have become very common handling equipment in factories and warehouses

Simple classification: Electric transport trucks are powered by electric lifting and electric movement; manual transport trucks are powered by manual hydraulic lifting and human pulling

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to operate in narrow spaces

? AC drive system, stepless speed regulation, safe, silent, emergency reverse device/emergency brake switch

Abstract: In order to reduce the width of the stacking channel and improve the storage capacity and storage efficiency, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift

During normal use, pay attention to the insulation of the battery

Please indicate the company and position when adding, otherwise it will not be approved

5T, 3T; the choice of purchasing configuration depends on the weight of the goods and the maximum fork height

When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h

BYD Electric Reach Forklift Maintenance Information-

Everyone was focusing on production, cost, price, channels, and sales, but the investment in the introduction of high-tech talents and product research and development was obviously insufficient

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

The speed limit when carrying goods in the warehouse is 5KM/h

The new architecture and edge computing architecture generated by 5G will soon meet the low-time, high-speed operation, and rapid decision-making requirements of driverless cars

At present, most battery forklifts, stackers and transporters on the market use lead-acid batteries

Flexible configuration of the forklift for subsequent use

After lowering the forks to the lowest position, withdraw the electric pallet truck

You must follow the above methods to buy genuine products and enjoy perfect after-sales service

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

3 The routes can be set in advance, and the unmanned forklift will work according to the set routes

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info