综合久久综合久久,欧美在线观看视频,精品久久久久久国产

BYD Ride-On Electric Forklift Office-

What kind of faults usually occur when electric forklifts are in use? Electric forklifts, I believe everyone is familiar with them, right? Generally speaking, mechanical equipment will inevitably fail after long-term use, and electric forklifts are no exception

It has currently formed three major product series: drive systems, smart vehicles, and vehicle networking service platforms

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

Chain components 1

Low maintenance cost: Current electric forklifts all use AC motors, which do not require carbon brushes

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

In the daily maintenance process, we need to do a good job of maintaining various gaskets

When the cargo width, length, and height exceed the limit, an alarm signal will be issued; ② The loading platform is designed with sensors to determine whether there is a pallet and whether it is empty or full; ③ In the hydraulic system, a pressure detection sensor is designed

Full Chinese display instrument: The advanced Chinese display instrument can display the operating status of vehicles in real time, provide vehicle fault alarms and prompts, and intelligently provide the most accurate real-time information for operation and maintenance personnel, realizing personalized operation functions

However, since its development, electric forklifts have been subject to the bottleneck of batteries

Be careful! Unauthorized driving is not allowed

In October 2018, Noli released a lithium-ion electric transport truck named "Tiangang 15" with a rated load of 1,500kg

Standing driving, walking, side driving, guard plates, pedals all have different variables The forks can be tilted forward and backward following the hydraulic cylinder

BYD Ride-On Electric Forklift Office- They rely on human transportation and handle operation, which is simple and flexible, environmentally friendly and energy-saving 2 2 Finally, the fork is retracted and the loading platform falls back to the low position

Use lithium battery design: Compared with traditional lead-acid batteries, BYD forklift iron batteries have several major technical advantages: low operating costs and a battery cycle of about 10 years, which are characteristics and advantages that traditional rechargeable batteries cannot match

In addition, no one is allowed to stand on the forklift

The fork deflection test of the prototype is not higher than the 40mm designed in this article

Different types of forklifts are being used more and more widely in industrial production, playing a very important role

So far, Hangcha Group has launched more than 30 AGV products equipped with various navigation methods

The steering system, hydraulic control system, and acceleration and braking system are all transmitted by electrical signals, which greatly reduces the workload of operators and is very helpful in improving their work efficiency and accuracy

Electric Pallet Trucks Drive and Operation start 1

The humidity of the buffer zone can be controlled with the help of a dehumidifier, or the temperature can be controlled by isolating the loading and unloading area to ensure a lower humidity

The operation and control of electric forklifts are relatively simple and flexible

BYD Ride-On Electric Forklift Office- Freight is also very convenient, the body is agile, and most importantly, it is very environmentally friendly

Power socket assembly When charging the battery, unplug the socket with the handle and plug it into the plug on the charger

The forks can be tilted forward and backward following the hydraulic cylinder

, jointly invested in the establishment of Hangzhou Pengcheng New Energy Technology Co

Check the turn signal; 5

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

If the abnormal noise is caused by damaged parts, we can consult the truck manufacturer for repair or replacement

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency

At the same time, because electrical components are often contaminated with water vapor, short circuits, leakage and other accidents are prone to occur

The price of a semi-electric transporter is about 3,000 yuan

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

It integrates power, braking, differential, and load-bearing in one, and has speed, temperature and other sensor interfaces, which is more conducive to intelligent control

3 Forklift is a non-manpowered tool for transporting goods in warehouses Pay attention to the appearance of the forklift Although it is a second-hand forklift, its overly damaged appearance not only looks unsightly, but also poses a great safety hazard when used

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info